# Matter Linux/Mac All Clusters Example ## Compiling all-clusters-app for testing on Linux and Mac To compile all-clusters-app on Intel Mac, run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target darwin-x64-all-clusters-no-ble-asan-clang build" ``` at the top level of the Matter tree. To compile on an Arm Mac, run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target darwin-arm64-all-clusters-no-ble-asan-clang build" ``` Similarly, to compile on Linux x86-64 run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target linux-x64-all-clusters-no-ble-asan-clang build" ``` And to compile on Linux ARM run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target linux-arm64-all-clusters-no-ble-asan-clang build" ``` ## Fuzzing integration This example also supports compilation with libfuzzer enabled. This should be used when trying to fuzz-test the Matter SDK. ### Compiling with fuzzing enabled To compile with libfuzzer enabled on Mac, run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target darwin-x64-all-clusters-no-ble-asan-libfuzzer-clang build" ``` at the top level of the Matter tree. Similarly, to compile on Linux run: ``` $ ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target linux-x64-all-clusters-no-ble-asan-libfuzzer-clang build" ``` ### Running libfuzzer-enabled binaries #### Initial run To run the resulting binary with no particular inputs do: ``` $ ./out/darwin-x64-all-clusters-no-ble-asan-libfuzzer-clang/chip-all-clusters-app-fuzzing ``` or ``` $ ./out/linux-x64-all-clusters-no-ble-asan-libfuzzer-clang/chip-all-clusters-app-fuzzing ``` If this crashes, it will output the input that caused the crash in a variety of formats, looking something like this: ``` 0xe,0x0,0xf1,0xb1,0xf1,0xf1,0xf1,0xf1,0xed,0x73,0x7,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xc1,0x0,0x0,0x0,0x0,0x0,0x5c,0xf3,0x25,0x0,0x0,0x0,0x0,0x0, \016\000\361\261\361\361\361\361\355s\007\000\000\000\000\000\000\000\301\000\000\000\000\000\\\363%\000\000\000\000\000 artifact_prefix='./'; Test unit written to ./crash-c9fd2434ccf4a33a7f49765dcc519e1fd529a8e5 Base64: DgDxsfHx8fHtcwcAAAAAAAAAwQAAAAAAXPMlAAAAAAA= ``` Note that this creates a file holding the input that caused the crash. #### Run with a fixed input To run the binary with a specific input, place the input bytes in a file (which a crashing run of the fuzzer does automatically). If `$(INPUT_FILE)` is the name of that file, then run: ``` $ ./out/darwin-x64-all-clusters-no-ble-asan-libfuzzer-clang/chip-all-clusters-app-fuzzing $(INPUT_FILE) ``` or ``` $ ./out/linux-x64-all-clusters-no-ble-asan-libfuzzer-clang/chip-all-clusters-app-fuzzing $(INPUT_FILE) ``` #### Additional execution options. The binary can be run with `-help=1` to see more available options. Running with `ASAN_OPTIONS="handle_abort=2"` set in the environment may produce nicer stack traces. ### Trigger event using all-cluster-app event named pipe You can send a command to all-cluster-app to trigger specific event via all-cluster-app event named pipe /tmp/chip_all_clusters_fifo-. #### Trigger `SoftwareFault` events 1. Generate event `SoftwareFault` when a software fault takes place on the Node. ``` $ echo '{"Name":"SoftwareFault"}' > /tmp/chip_all_clusters_fifo- ``` #### Trigger `HardwareFault` events 1. Generate event `HardwareFaultChange` to indicate a change in the set of hardware faults currently detected by the Node. ``` $ echo '{"Name":"HardwareFaultChange"}' > /tmp/chip_all_clusters_fifo- ``` 2. Generate event `RadioFaultChange` to indicate a change in the set of radio faults currently detected by the Node. ``` $ echo '{"Name":"RadioFaultChange"}' > /tmp/chip_all_clusters_fifo- ``` 3. Generate event `NetworkFaultChange` to indicate a change in the set of network faults currently detected by the Node. ``` $ echo '{"Name":"NetworkFaultChange"}' > /tmp/chip_all_clusters_fifo- ``` 4. Generate event `BootReason` to indicate the reason that caused the device to start-up, from the following set of `BootReasons`. - `PowerOnReboot` The Node has booted as the result of physical interaction with the device resulting in a reboot. - `BrownOutReset` The Node has rebooted as the result of a brown-out of the Node’s power supply. - `SoftwareWatchdogReset` The Node has rebooted as the result of a software watchdog timer. - `HardwareWatchdogReset` The Node has rebooted as the result of a hardware watchdog timer. - `SoftwareUpdateCompleted` The Node has rebooted as the result of a completed software update. - `SoftwareReset` The Node has rebooted as the result of a software initiated reboot. ``` $ echo '{"Name":""}' > /tmp/chip_all_clusters_fifo- ``` #### Trigger Switch events 1. Generate event `SwitchLatched`, when the latching switch is moved to a new position. ``` $ echo '{"Name":"SwitchLatched","NewPosition":3}' > /tmp/chip_all_clusters_fifo- ``` 2. Generate event `InitialPress`, when the momentary switch starts to be pressed. ``` $ echo '{"Name":"InitialPress","NewPosition":3}' > /tmp/chip_all_clusters_fifo- ``` 3. Generate event `LongPress`, when the momentary switch has been pressed for a "long" time. ``` $ echo '{"Name":"LongPress","NewPosition":3}' > /tmp/chip_all_clusters_fifo- ``` 4. Generate event `ShortRelease`, when the momentary switch has been released. ``` $ echo '{"Name":"ShortRelease","PreviousPosition":3}' > /tmp/chip_all_clusters_fifo- ``` 5. Generate event `LongRelease` when the momentary switch has been released and after having been pressed for a long time. ``` $ echo '{"Name":"LongRelease","PreviousPosition":3}' > /tmp/chip_all_clusters_fifo- ``` 6. Generate event `MultiPressOngoing` to indicate how many times the momentary switch has been pressed in a multi-press sequence, during that sequence. ``` $ echo '{"Name":"MultiPressOngoing","NewPosition":3,"CurrentNumberOfPressesCounted":4}' > /tmp/chip_all_clusters_fifo- ``` 7. Generate event `MultiPressComplete` to indicate how many times the momentary switch has been pressed in a multi-press sequence, after it has been detected that the sequence has ended. ``` $ echo '{"Name":"MultiPressComplete","PreviousPosition":3,"TotalNumberOfPressesCounted":2}' > /tmp/chip_all_clusters_fifo- ```