Matter BEKEN Lighting Example

This example demonstrates the Matter Lighting application on BEKEN platforms.

---

• Matter BEKEN Lighting Example

  • Supported Devices

  • Building the Example Application

  • Commissioning over BLE using chip-tool

---

Supported Devices

The demo application is intended to work on following categories of BEKEN devices:

• BK7235 EVB

Building the Example Application

Building the example application requires the use of the BEKEN ARMINO IoT Development Framework (BK-ARMINO).

• Setting up the build environment, recommended with Ubuntu 20.04 LTS

  Armino sdk download

  $ cd ~
  $ git clone git@github.com:zhengyaohan/armino.git
  $ git checkout matter
  

  Toolchain download and install, the toolchain should be installed to “/opt/risc-v”

  $ sudo tar xvzf {abs-path-to-download}/risc-v_20220418.tar.gz -C /opt
  $ sudo mv /opt/risc-v_20220418 /opt/risc-v
  $ sudo chown -R $USER:$USER /opt/risc-v
  

  Software dependency install

  $ sudo dpkg --add-architecture i386
  $ sudo apt-get update
  $ sudo apt-get install build-essential cmake python3 python3-pip doxygen ninja-build libc6:i386 libstdc++6:i386 libncurses5-dev lib32z1 -y
  $ sudo pip3 install sphinx_rtd_theme future breathe blockdiag sphinxcontrib-seqdiag sphinxcontrib-actdiag sphinxcontrib-nwdiag sphinxcontrib.blockdiag
  $ sudo ln -s /usr/bin/python3 /usr/bin/python
  

  To activate connectedhomeip files.

  $ cd {abs-path-to-connectedhomeip}
  $ source ./scripts/bootstrap.sh
  $ source ./scripts/activate.sh
  

  Link connectedhomeip into ARMINO.

  $ cd {abs-path-to-ARMINO}
  $ ln -sfv {abs-path-to-connectedhomeip} components/matter/
  

• build project matter,and flash image file

  $ cd {abs-path-to-ARMINO}
  $ make bk7235 PROJECT=matter
  

  the output bin file is {abs-path-to-ARMINO}/build/matter/bk7235/all-app.bin. you can use WINDOWS BEKEN FLASH WRITE TOOL to flash the demo application onto the device.

Commissioning over BLE using chip-tool

• Please build the standalone chip-tool as described here

• Commissioning the WiFi Lighting devices

  $ ./out/debug/chip-tool pairing ble-wifi 12345 <ssid> <passphrase> 20202021 3840
  

Cluster Control

After successful commissioning, use the OnOff cluster command to control the OnOff attribute. This allows you to toggle a parameter implemented by the device to be On or Off.

$ ./out/debug/chip-tool onoff on 12345 1